How can I change the fan mode?

To turn on Natede, just keep your hand still in front of sensor. After a double blink of the LEDs you will enter the change mode. Every second the mode is changed in the following order: silent, standard, performance, off.

1. Silent (fan at 25% and LEDs off): the lowest band of LEDs lights up as indicated;
2. Standard (fan at 50% and LEDs on): the low and mid-range of the LEDs light up as indicated;
3. Performance (fan at 100% and LEDs on): the whole LED band is on as indicated;
4. Off: fan and led are off. Once you remove the hand, the LEDs flash 2 times to confirm the selection.

To see the currently selected mode, just pass your hand in front of sensor A and the LEDs will flash for 1 second.

If you want to turn o the product or change the fan mode, you must keep your hand still in front of the sensor and the sequence will start again from silent mode.

For Natede Smart with the Vitesy Hub app, you can choose from 6 different modes:

• AUTOMATIC: Natede Smart activates when it detects poor indoor air quality.
• STANDARD: Natede Smart just works at the normal power to maintain a good air quality over the time.
• PERFORMANCE: Smart Natede uses its maximum power to immediately destroy pollutants.
• SILENCE: Natede Smart works at minimum power and cleans your air in the background.
• CUSTOM: choose your favourite settings according to your needs.
• TIMER: set the times when Natede turns on with the desired mode.