My WiFi network isn't visible to connect my Eteria

If you can’t see your WiFi network on the list, try these steps:

• Move your Eteria close to the router
• Swipe numerous times the page
• Reset your Eteria and try again
• Make sure your connection is stable in that moment

Also remember that we may not support every type of settings, so make sure: 

• Your WiFi network must be set on 2.4GHz frequency. You can try to change the frequency of your router or, if it's dual-band, create a new WiFi network with a 2.4GHz frequency. Eteria only works with 2.4GHz frequency.
• Your WiFi network must be set under channel 11 or lower on your router settings. 
• Your WiFi password must be at least 8 characters long and max 32 characters long. 
• Your WiFi password can’t contain any special characters. Here’s the list of the accepted characters: 1 ! # $ & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~ "
• You have iOS 14.0 or later & Android 6.0 or later.
• You are not using a WiFi extender. Right now Eteria doesn’t support some of them.

Please note: it is also possible to connect the device via hotspot, however, it is best to use a home network, since the phone should always be next to the device. Also, a hotspot connection is not as stable and lasting as that of a fixed router.